American DJ® User Instructions
Tempest™
HALOGEN LAMP WARNING!
This fixture is fitted with halogen lamps which are highly susceptible to damage if improperly handled. Never touch lamp with bare fingers as the oil from your hands will shorten lamp life. Also, never move fixture until lamp has had ample time to cool. Remember, lamps are not covered under warranty conditions.
Caution! Always disconnect from main power before replacing lamps or servicing unit. Remember to always replace with same lamps and fuses.
Model: Tempest™
SPECIFICATIONS:Lamp: ZB-EVD 36V 400W
Power: 110V/60Hz
Optics: High Quality Glass Lenses
Ventilation: Fan Cooled
Working Position: Any
Weight: 53 lbs.
Size: 27.5” x 27.5” x 8.5”
Duty Cycle: 30 min. on 10 min. off
Thank you for purchasing this American DJ® product. For your
convenience this lighting effect has been lamped and is ready to be used, there is no assembly required. Please read the following instructions before installing or using your new unit.
Operating Instructions:
Unit is ready to be hung or set on the ground. After plugging in unit, the lights will react to the music via the sound active internal microphone. Adjust the sound activation knob on the back of the unit for desired music sensitivity.
The Tempest™ is a centerpiece effect by American DJ®, featuring 6 separate mirror units creating solid and moonflower type beams that rotate and sweep across a room. The Tempest™ has a low profile design for clubs with low ceilings, producing 6 dichroic colors plus white.
To replace lamp; unscrew knobs on lamp replacement hatch on the center front of the fixture. Replace bulb; reassemble.
For service co ntact your American DJ® dealer.
American DJ® LOS ANGELES, CA. 90058
