Troubleshooting
Troubleshoot the switch using the LEDs to detect problems.
Power LED
The PWR LED on the front panel does not light up.
Table 3 Troubleshooting Power LED
STEPS | CORRECTIVE ACTION |
1Check the connections from your switch to the power source. Make sure you are using the supplied power adapter and that you are using an appropriate power source.
2Make sure the power source is turned on and that the switch is receiving sufficient power.
3If these steps fail to correct the problem, contact your local distributor for assistance.
LK/ACT LED
The LK/ACT LED does not light up when a device is connected.
Table 4 Troubleshooting LK/ACT LED
STEPS | CORRECTIVE ACTION |
1Verify that the attached device(s) is turned on and properly connected to your switch.
2Make sure the Network Interface Cards (NICs) are working on the attached devices.
10