t i o n s
II.To Enhance Antenna Performance of Laptop Computers and Other
Laptop computers and other
ZyXEL’s ZyAIR
Installation Steps
1.Insert the reverse SMA end of the transfer cable connector (C2) into the SMA straight plug connector (A1) on the antenna.
2.Detach the factory default antenna from the
3.Insert the MMCX end of the transfer cable connector (C1) into the MMCX external antenna connector (P1) on the PC card.
4.Insert the PC card into the wireless ready slot of the PC or wireless device.
5.Place the antenna in the desired position.
Step 1 |
|
| Detach the factory default |
| Insert the MMCX end of the transfer cable |
| 2 |
|
| 3 connector (C1) into the MMCX externa | |
Step | antenna from the | Step | |||
|
| ||||
Insert the reverse SMA end of |
|
|
|
| antenna connector (P1) on the PC card |
the transfer cable connector |
|
|
|
|
|
connector (A1) on the antenna.
P1
1
C2
C1
Insert the PC card into the wireless ready slot | Place the antenna in the |
Step 4 of the PC or wireless device. | Step 5 desired position. |
Notice
Allow the antenna cable to bend naturally. It is recommended that you place the antenna no more than one meter from the PC card to avoid excessive strain on the cable and connector.
Specification
•IEEE 802.11b WLAN Standard
•Detachable Patch Antenna
•Data Rate: 11Mbps / 5.5Mbps / 2Mbps / 1Mbps
•Output Power: 15 dBm (typical)
•Device Drivers: Support Windows 98/ME/2000/XP
•Coverage area:
Indoor: 50M @ 11Mbps/80M @ 5.5Mbps or lower
Outdoor: 200M @ 11Mbps/300M @ 5.5Mbps or lower
Accessory
MMCX to SMA converter cable