ZyXEL Communications G-100 2.7The Site Survey Screen, Site Survey, Table 2-1ZyAIR Utility: Link Info

	ZyAIR G-100 User’s Guide
	Table 2-1 ZyAIR Utility: Link Info
LABEL	DESCRIPTION
Current SSID	This field displays the name of the wireless LAN network to which the ZyAIR is
	associated.
Status	This field displays the connection status of the ZyAIR. This field is blank if there is no
	device associated with the ZyAIR.
Re-Connect	Click Re-Connectto re-establish the connection to the wireless network whose SSID is
	shown in the Current SSID field.
Channel	This field displays the radio channel the ZyAIR is currently using.
Transfer Rate	This field displays the current transmission rate of the ZyAIR in megabits per second.
Security	This field displays the security level configured as either None, WEP, WPA-PSK, WPA
	or 802.1x for the wireless device.
Current IP	This field displays your computers IP address.
Operating Mode	This field displays the operating mode of the ZyAIR.
	Infrastructure: the ZyAIR associates to an AP.
	Ad-Hoc:the ZyAIR associates to a peer ad-hoc computer.
TX/RX (Total Frame)
Transmitted	This field displays the number of data frames transmitted.
Received	This field displays the number of data frames received.
Signal Strength	The status bar and the percentage number or a number in dBm show the strength of the
	signal.
Link Quality	The status bar and the percentage number show the quality of the signal.
OK	Click OK to apply the changes and close the screen.
Cancel	Click Cancel to discard all changes and close the screen.
Help	Click Help to display on-line help screen.

2.7The Site Survey Screen

Use the Site Survey screen to scan for and connect to a wireless network automatically.

Using the ZyAIR Utility 2-5