ZyXEL G-162 User’s Guide

Your ZyXEL G-162 (in infrastructure mode) can transmit at the proprietary

transmission rates of 22Mbps or 125 Mbps if you are connecting to the ZyXEL G-

560.3

2.1.4 Wireless Network Application

Wireless LAN works in either of the two modes: ad-hoc and infrastructure.

To connect to a wired network within a coverage area using Access Points (APs), set the ZyXEL G-162 operation mode to Infrastructure (BSS). An AP acts as a bridge between the wireless stations and the wired network. In case you do not wish to connect to a wired network, but prefer to set up a small independent wireless workgroup without an AP, use the Ad-hoc (IBSS) (Independent Basic Service Set) mode.

Ad-Hoc (IBSS)

Ad-hoc mode does not require an AP or a wired network. Two or more wireless stations communicate directly to each other. An ad-hoc network may sometimes be referred to as an Independent Basic Service Set (IBSS).

Figure 2-1 IBSS Example

To set up an ad-hoc network, configure all wireless stations in ad-hoc network

type and use the same SSID and channel.

Infrastructure (BSS)

When a number of wireless stations are connected using a single AP, you have a Basic Service Set (BSS).

3At the time of writing, the proprietary transmission rate is only available for ZyXEL G-162, G-360 and G-

2-2

Wireless LAN Network