LABEL |
| DESCRIPTION | |
|
|
|
|
RESET | You only need to use this button if you’ve forgotten the | ||
| ZyAIR’s password or the IP address is not known. It | ||
| returns the ZyAIR to the factory defaults. Refer to the | ||
| User’s Guide. | ||
|
|
|
|
LAN | Use an Ethernet cable to connect to a computer (with an | ||
| Ethernet card) or Ethernet device. The port is auto- | ||
| negotiating (can connect at 10 or 100 Mbps) and auto- | ||
| crossover (automatically adjusts to the type of Ethernet | ||
| cable you use | ||
|
| ||
Connect one end of the included power adaptor to this | |||
| power socket. | ||
|
|
| |
|
| Use only the included power |
|
|
| adaptor. |
|
|
|
|
|
3. Check the LED Display
After you make the hardware connections, check the LEDs on the ZyAIR.
LED | COLOR | STATUS | DESCRIPTION |
|
|
|
|
PWR | Green | On | The ZyAIR is receiving power. |
|
|
|
|
|
| Blinking | The ZyAIR is rebooting or not ready. |
|
|
|
|
| Orange | On | Power to the ZyAIR is too low or there is a hardware failure. |
|
|
|
|
|
| Off | The ZyAIR is not receiving power. |
|
|
|
|
3