3
Hardware Connections
Figure 1 The G-470: Rear Panel
The following table describes the rear panel of the G-470.
Follow the steps below to install the G-470 in your computer.
1Screw the antenna clockwise onto the antenna connector.
Make sure the antenna is securely screwed onto the
antenna connector.
2Use an Ethernet network cable to connect your computer
to the ETHERNET port for Internet access.
3Use the power adaptor provided with your G-470 to
connect an appropriate power source to the POWER
socket. Make sure the power source is on. Use only the
included power adaptor.
Label Description
1 Antenna connector
2RESET button
3ETHERNET port
4POWER socket