ZyXEL G-560 Quick Start Guide

1.Locate a high position on the wall that is free of obstructions.

2.Connect two screws (not included) in the wall 74mm apart. Use screws with 6mm ~ 8mm (0.24" ~ 0.31") wide heads. Do not screw the screws all the way into the wall. Leave a small gap between the head of the screw and the wall. The gap must be big enough for the screw heads to slide into the screw slots and the connection cables to run down the back of the G-560.

Make sure the screws are securely fixed to the wall and strong enough to hold the weight of the G-560 with the connection cables.

3.Adjust the cables.

a.Run the connection cables down the back of the G-560.

OR:

b.Run the connection cables upward and along the edge of the ceiling.

7