ZyXEL Communications GS-105, GS-108 PWR, Port Connection, Desktop Installation, Rear Panel Power Connection, Figure 1 Rear Panel: GS-108, Figure 2 Rear Panel: GS-105

GS-105/GS-108 Gigabit Switch

Desktop Installation

Step 1. Make sure the switch is clean and dry.

Step 2. Set the switch on a smooth, level flat space strong enough to support the weight of the switch and the connected cables. Make sure there is a power outlet nearby.

Step 3. Use the supplied power adapter to connect your switch to a power source. Refer to the label on the power adapter for more information.

Do not block the ventilation holes.Rear Panel Power Connection

Connect one end of the supplied power adaptor to the power port on the rear panel of the switch and the other end to the appropriate power source. The PWR LED turns on.

Port Connection

For GS-105, the Ethernet ports are located on the rear panel. For GS-108, the Ethernet ports are located on the front panel.

Figure 1 Rear Panel: GS-108Figure 2 Rear Panel: GS-105

2