ZyXEL NWD-370N User’s Guide

The following table describes the labels in this screen.

Table 15 Profile: Wireless Settings

LABEL

DESCRIPTION

 

 

Wireless Settings

 

 

 

Wireless Mode

This is the wireless standard the NWD-370N uses. In Ad-Hoc mode, you can use

 

only 802.11g.

Channel

Select a channel number from the drop-down list box. To associate to an ad-hoc

 

network, you must use the same channel as the peer computer.

3If you selected Infrastructure network type in the first screen, select WEP, WPA, WPA2, WPA-PSK, WPA2-PSKor 802.1x from the drop-down list box to enable data encryption. If you selected Ad-Hocnetwork type in the first screen, you can use only WEP encryption method. Otherwise, select DISABLE to allow the NWD-370N to communicate with the access points or other peer wireless computers without any data encryption, and skip to step 5.

Figure 30 Profile: Wireless Settings

4The screen varies depending on the encryption method you select in the previous screen. The settings must be exactly the same on the APs or other peer wireless computers as they are on the NWD-370N. Refer to Section 4.3.1 on page 39 for detailed information on wireless security configuration.

48

Chapter 4 Wireless Configuration