P-2302HW/HWL-P1 Series Quick Start Guide

5POWER: Use the power adaptor provided with your P-2302HW/HWL-P1 to connect an appropriate power source to this socket.

1.1 LEDs (Lights)

•The POWER light blinks during start-up and is green once the P-2302HWL-P1 is ready.

•Each ETHERNET light turns on if the corresponding ETHERNET port is properly connected. The lights blink when the P-2302HWL-P1 is sending or receiving data through the correspond- ing ETHERNET port.

•The WAN light stays on if a physical connection with your DSL modem exists. The INTERNET light stays on when Internet access is available.

•The PHONE lights stay on when your SIP account is registered and they blink if the receiver is off the hook.

•The WLAN light turns on when the wireless LAN is ready. It blinks when the P-2302HWL-P1 is sending/receiving data through the wireless LAN.

If none of the LEDs are on, turn the device off and recheck your hardware connections.

2 Initial Configuration

1 Open your browser, and go to http://192.168.1.1.

2 Enter the password 1234. Then, click Login.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3