ENGLISH

lower than High in Internet Explorer (in Internet Explorer, click Tools > Internet Options > Security > Custom Level...). See the appendix in the User’s Guide for more information.

2 If you cannot access the Internet when your computer is connected to the LAN port, follow these steps.

A)Check the LEDs on the top panel. If they are different than what is described in section 1, make sure the connections are correct. If the LEDs are still different, turn off the device, wait a few seconds, and turn it on again.

B)Follow the steps in section 3 again. Make sure you enter the correct information. For example, if your account has a user name and password, make sure you type it correctly. In addition, if you are not sure which encapsulation your ISP uses, contact your ISP.

C)If you are using a new Internet account, contact your ISP to make sure it is active.

D)If you still have problems, see Troubleshooting in the User’s Guide.

3If you cannot print anything using the USB printer connected to the P-335 Plus, follow these steps.

A)Make sure you install the print server driver on your computer; see section 4.

B)Make sure the USB printer is powered on and can work properly.

C)Check the USB cable connections.

Set Up Your Computer’s IP Address

This section shows you how to set your Windows NT/2000/XP computer to automatically get an IP address. This ensures that your computer can communicate with your P-335 Plus. Refer to your User’s Guide for detailed IP address configuration for other Windows and Macintosh computer operating systems.

1In Windows XP, click start, Control Panel. In Windows 2000/NT, click Start, Settings, Control Panel.

2In Windows XP, click Network Connections. In Windows 2000/NT, click Network and Dial-up Connections.

3Right-clickLocal Area Connection and then click Properties.

4Select Internet Protocol (TCP/IP) (under the General tab in Win XP) and click Properties.

5The Internet Protocol TCP/IP Properties screen opens (the

General tab in Windows XP).

6 Select the Obtain an IP address automatically and Obtain DNS server address automatically options.

7 Click OK to close the Internet Protocol (TCP/IP) Properties window.

8Click Close (OK in Windows 2000/NT) to close the Local Area Connection Properties window.

9Close the Network Connections screen.

14