ZyXEL Communications P-660HW-TX

P-660HW-Tx v2 Series Support Notes

• Setup the P-660HW-Tx v2 as a DHCP Relay

We could set the P-660HW-Tx v2 as a DHCP Relay by the following command

in CLI:

Ip dhcp enif0 mode relay

Ip dhcp enif0 relay server [Server IP Address]

4. SUA Notes

Tested SUA/NAT Applications (e.g., Cu-SeeMe, ICQ, NetMeeting)

Introduction

Generally, SUA makes your LAN appear as a single machine to the outside

world. LAN users are invisible to outside users. However, some applications

such as Cu-SeeMe, and ICQ will need to connect to the local user behind the

P-660HW-Tx v2. In such case, a SUA server must be configured to forward the

incoming packets to the true destination behind SUA. After the required server

are configured in Web Configurator, Advanced Setup, Network -> NAT ->

Port Forwarding, the internal server or client applications can be accessed by

using the P-660HW-Tx v2's WAN IP Address.

SUA Supporting Table

The following are the required Web Configurator, Advanced Setup, Network

-> NAT -> Port Forwarding for the various applications running SUA mode.

ZyXEL SUA Supporting Table1

Required Settings in Port Forwarding

Port/IP

Application

Outgoing Connection Incoming

Connection

HTTP None 80/client IP

FTP None 21/client IP