P-660HWP-Dx Quick Start Guide
10
section and enter it in the IP Address field. If not, select Obtain an IP Address
Automatically. Click Apply and run the Internet/Wireless Setup wizard again r
VIf you have a DSL connection and have entered your ISP settings, but you
cannot access the Internet, follow these steps.
1 Check you have correctly entered the information your ISP gave you.
2If you are using Bridge mode (check Mode in the Network > WAN > Internet
Connection screen) click NAT > General and ensure Active Network Address
Translation (NAT) is not selected. Click LAN > DHCP Setup and ensure that DHCP is
set to None. Your ISP gives your computer an IP address directly. If you want to
access the P-660HWP-Dx again, you need to use a static IP address in the same
subnet as your P-660HWP-Dx (the P-660HWP-Dx’s default IP LAN address is http://
192.168.1.1).
3Click the wizard icon ( ). Run the Internet/Wireless Setup wizard again.
4Contact your Internet Service Provider to check the status of your account.
5If you still have problems, see Troubleshooting in the User’s Guide.
VIf you cannot access the Internet using the wireless network, do the
following.
On a computer connected to the P-660HWP-Dx, make sure your P-660HWP-Dx and the
computers on your wireless network are using the same SSID, channel and wireless
security settings. See the chapter on Wireless LAN in the User’s Guide for more
information.