P-660HWP-Dx Quick Start Guide
2

1 Hardware Connections

1DSL: Use the gray telephone wire to connect your P-660HWP-Dx’s DSL port to a
telephone jack (or to the modem port on a splitter if you are using one).
2ETHERNET: Use the yellow Ethernet cable to connect a computer to an ETHERNET
port on the P-660HWP-Dx for initial configuration and/or Internet access.
3POWER: Use only the power cable that came in the package to connect your P-
660HWP-Dx to a power outlet. Make sure the power outlet is switched on. This socket
will also act as your HomePlug AV connection.
4Push in the POWER button.
5Look at the lights on the front panel.
•The POWER light (LED) blinks while your P-660HWP-Dx starts up and stays on once it is
ready.
•The ETHERNET, WLAN, DSL, INTERNET and POWERLINE LEDs turn on if the corre-
sponding connections are properly made.
VCheck your connections if an LED does not turn on. Then turn the P-

660HWP-Dx off, wait for a few seconds and turn it back on. See

Troubleshooting. If the problem remains, contact your local vendor.

2 Internet Connection Setup: Automatic

Use this section to have your P-660HWP-Dx automatically detect and set up your Internet
connection.