P-660RU-T v2 Quick Start Guide

After you’ve made the connections, push in the power button to turn on the P-660RU-T v2. Look at the lights on the front panel.

•The POWER light blinks while performing system testing. It then turns steady on if the testing is successful.

•The DSL light blinks then turns steady on, and blinks when there is traffic.

•The USB light turns on if the USB port is properly connected, and blinks when there is traffic.

If none of the LEDs are on, unplug the device and recheck your hardware connections.

Install the USB Software

Follow the steps below to install the USB driver.

1Save your work and close all applications.

2Connect the P-660RU-T v2 to a USB port on your computer. A Found New Hardware Wizard screen displays.

5