ZyXEL Communications P-660RU-Tx v2 USB, ETHERNET, USB, USB, DSL, DSL, DSL, USB, POWER, POWER, POWER, POWER

P-660RU-Tx v2 Quick Start Guide

"Do NOT connect the same computer to both the USB and ETHERNET ports on the P-660RU-Tx v2.

1USB: Connect the provided USB cable to the P-660RU-Tx v2’s USB port.

2DSL: Use the gray telephone wire to connect your P- 660RU-Tx v2’s DSL port to a telephone jack (or to a splitter, if one is already installed).

3POWER: Use the power adaptor provided with your P- 660RU-Tx v2 to connect an appropriate power source to the POWER socket. Make sure the power source is on.

4Push in the POWER button.

5Look at the lights on the front panel.

•The POWER light blinks while your P-660RU-Tx v2 starts up and stays on once it is ready.

•The DSL light is on when the P-660RU-Tx v2 has a DSL connection.

•The USB light turns on if the USB port is properly connected, and blinks when there is traffic.

5