ZyXEL Communications P-660RU-Tx v2 Viewing Your Product’s Certifications, WAN, NAT, LAN, Mode, DHCP, None, Bridge, General, Net- work, DHCP Setup, Internet Connection, ). Run the Internet Setup

P-660RU-Tx v2 Quick Start Guide

• Click the wizard icon (		). Run the Internet Setup
wizard again. Check whether you can access the Inter-
net.

If you still cannot access the Internet, take the following steps:

•If you are using Bridge mode (check Mode in the Net- work > WAN > Internet Connection screen) click NAT > General and ensure Active Network Address Trans- lation (NAT) is not selected. Click LAN > DHCP Setup and ensure that DHCP is set to None. Your ISP gives your computer an IP address directly. If you want to access the P-660RU-Tx v2 again, you need to use a static IP address in the same subnet as your P-660RU- Tx v2 (the P-660RU-Tx v2’s default IP address is 192.168.1.1).

• Click the wizard icon (		). Run the Internet Setup
wizard again. Check whether you can access the Inter-
net.

If you still cannot access the Internet, contact your Internet Service Provider.

Viewing Your Product’s Certifications

1Go to www.zyxel.com.

2Select your product from the drop-down list box on the ZyXEL home page to go to that product's page.

3Select the certification you wish to view from this page.