P-660W-Tx v2 Quick Start Guide

2Select the ESSID name you gave the P- 660W-Tx v2 and click Connect. (The ESSID used here is an example.)

3If you have set up wireless security, you are prompted to enter a password. Enter the Pre- Shared Key you set up in the previous section and click Connect.

4If you connected successfully, a message similar to the following displays.

If you cannot connect wirelessly to the P-660W-Tx v2, check that you are using the same ESSID and security key on both the P-660W-Tx v2 and your wireless client.

5Congratulations! That completes the setup procedure for your P-660W-Tx v2. Open a web browser, such as Internet Explorer, to visit your favorite website.

Procedure to View a Product’s Certification(s)

1 Go to www.zyxel.com.

2Select your product from the drop-down list box on the ZyXEL home page to go to that product's page.

3Select the certification you wish to view from this page.

10