
P-660W-Tx v2 Quick Start Guide
2Click Wireless.
3Select Enable Wireless LAN.
4ESSID: Type the name (up to 32 characters) you want to give to your wireless network.
5Channel ID: Change the Channel ID from the default if interference is a problem on your network.
6Security Mode: Select the strongest Security Mode that devices on your
wireless network support. WPA2-PSKis a good choice for a home network. In this screen, select WPA Compatible and type a Pre-Shared Key using a combination of letters and numbers (8~63 characters long). Then click Apply to save your settings.
Write down the Pre-Shared Key!
"Write down the Pre-Shared Key and ESSID as you will need to use them again when you connect your computer to the P-660W-Tx v2.
3.2Connect to the P-660W-Tx v2 Wirelessly From Your Computer
You can now connect to your P-660W-Tx v2 via a wireless connection, and access the Internet. You need the ESSID and also the Pre-Shared Key if you set up security in the previous section. The connection procedure is shown here (using Windows XP as an example).
1Right-click the wireless adapter icon which appears in the bottom right of your computer screen. Click View Available Wireless Networks.