P-662HW-D Series Quick Start Guide

7Click INTERNET / WIRELESS SETUP. Wait while your P- 662HW-D tries to detect your DSL connection.

8Follow the directions in the wizard. Do not change default settings if your ISP did not provide them.

OTIST

ZyXEL's One-Touch Intelligent Security Technology (OTIST) feature allows you to automatically configure the SSID and WPA-PSK on all OTIST-equipped wireless clients within range of the P-662HW-D.

Note: If you enable OTIST but select Disable wireless security using the wireless wizard, the P- 662HW-D will create a WPA-PSK automatically.

If you enable OTIST and select Manually assign a WEP key using the wireless wizard, the P- 662HW-D will replace the WEP key with a WPA-PSK.

Enable OTIST only if your wireless clients support WPA and OTIST.

You must enable OTIST on the P-662HW-D and all wireless clients within three minutes in any order.

To start OTIST on the P-662HW-D, hold in the RESET button for one to five seconds. Do not hold the RESET button in for too long, as this will reset the P-662HW-D to the factory defaults.

To enable OTIST on wireless clients, click Start in the Adapter screen. The Setup Key is 01234567 by default. If you have previously saved a setup key on the P-662HW-D, use it instead of the default.

For more information, see Wireless LAN in the User's Guide.

Troubleshooting

1If you cannot access the web configurator using Internet Explorer in Windows XP or Windows Server 2003, make sure you allow pop-up windows, JavaScript and Java permission or set the Internet security level to any level lower than High in Internet Explorer (in Internet Explorer, click Tools > Internet Options > Security > Custom Level...). See the appendix in the User’s Guide for more information.

2If you cannot access the Internet when your computer is connected to the ETHERNET port, follow these steps.

6