ZyXEL Communications P-870MH-C1 2 Test Your Internet Connection, Troubleshooting, 1.1 Check the LEDs (Lights)

P-870MH-C1 Quick Start Guide

1.1 Check the LEDs (Lights)

•The POWER LED blinks and turns steady on.

•The VDSL and/or ETHERNET LEDs turn on and sometimes blink if the corresponding ports are properly connected.

If none of the LEDs are on, unplug the device and check your hardware connections again.

2 Test Your Internet Connection

After you have connected the hardware and turned on the P- 870MH-C1, open a web browser on your computer and go to any web site (for example, www.zyxel.com) to test your Internet connection.

Troubleshooting

1The POWER light is not on when I turn on the P-870MH- C1.

•You might be using the wrong power adaptor. Use the included power adaptor only.

•If you are using the correct power adaptor, disconnect and re-connect the power adaptor, and turn on the P- 870MH-C1 again.

•If the POWER light is still not on, use a different power outlet. Make sure the power source is also turned on.

2