Chapter 2 Hardware Description and Connection

See Table 7 on page 14 for how far apart to place the screws.

Table 7 Distance between the centers of the holes for wall mounting

MODEL

DISTANCE

ES1100-8P and ES1100-16P

198 mm

 

 

ES1100-16

150 mm

 

 

ES1100-24E

210 mm

 

 

1Screw the two screws provided with your Switch into the wall (see the figure in step 2). Use screws with 6 mm ~ 8 mm (0.24" ~ 0.31") wide heads. Do not screw the screws all the way in to the wall; leave a small gap between the head of the screw and the wall.

The gap must be big enough for the screw heads to slide into the screw slots and the connection cables to run down the back of the Switch.

Note: Make sure the screws are securely fixed to the wall and strong enough to hold the weight of the Switch with the connection cables.

2Align the holes on the back of the Switch with the screws on the wall. Hang the Switch on the screws.

The Switch should be wall-mounted horizontally. The Switch's side panels with ventilation slots should not be facing up or down as this position is less safe.

2.3.2 Rack Mounting

The Switch can be mounted on an EIA standard size, 19-inch rack or in a wiring closet with other equipment. Follow the steps below to mount your Switch on a standard EIA rack using a rack- mounting kit.

Rack-mounted Installation Requirements

• Two mounting brackets.

14

 

ES1100 Series User’s Guide