Chapter 2 Hardware Description and Connection

•Eight M3 flat head screws and a #2 Philips screwdriver.

•Four M5 flat head screws and a #2 Philips screwdriver.

Failure to use the proper screws may damage the unit.Precautions

•Make sure the rack will safely support the combined weight of all the equipment it contains.

•Make sure the position of the Switch does not make the rack unstable or top-heavy. Take all necessary precautions to anchor the rack securely before installing the unit.

Attaching the Mounting Brackets to the Switch

1Position a mounting bracket on one side of the Switch, lining up the four screw holes on the bracket with the screw holes on the side of the Switch.

Figure 9 Attaching the Mounting Brackets (ES1100-8P/16/16P/24E)

Figure 10 Attaching the Mounting Brackets (ES1100-24/24G)

2Using a #2 Philips screwdriver, install the M3 flat head screws through the mounting bracket holes into the Switch.

3Repeat steps 1 and 2 to install the second mounting bracket on the other side of the Switch.

4You may now mount the Switch on a rack. Proceed to the next section.

 

15

ES1100 Series User’s Guide