
IP address | :10.59.1.1 | |
TFTP | server IP address | :10.59.1.33 |
Gateway IP address | :10.59.1.33 | |
Subnet mask | :255.0.0.0 | |
File | name | |
Do you want to change above entries(Y/N)?n
Figure
7.The VSG downloads the firmware. After the file transfer is complete, the VSG restarts automatically.
Do you want to change above entries(Y/N)?n
Attached TCP/IP interface to rtl1.
Attaching network interface lo0... done.
Downloading...
100%
Erasing FLASH...OK
Writing to FLASH...OK
Restarting...
Figure
8.After the VSG finishes restarting, you should see the “Press any key to continue” prompt, press any key to display the SMT login screen. Enter “admin” as the username and “1234” as the password to access the VSG.
Troubleshooting |