VIZIO VT420M/VT470M User Manual
Version 5/26/2009 11
www.VIZIO.com
Chapter 1 Basic Controls and Connections
Front Panel
POWER ‘VIZIO’ LIGHT– The VIZIO name
lights white when powered on and it will get
dimmer when powered off.
REMOTE CONTROL SENSOR – This is the
window through which all of the remote
control signals pass to the sensor. Point the
remote control directly at this window for the
best response to the remote signal.
Side Pan el Controls
POWER ( ) – Power the TV on by pressing this button once.
Press the button again to power the TV off.
MENU – This button activates the On Screen Display (OSD). If a
sub-menu is active, pressing this button will return to the previous
menu level.
CH !" - – Use these buttons to step up or
down the TV channels. While the OSD is
active, these buttons function as up and down
controls in the OSD menus.
VOL #$ – Use these buttons to increase or
decrease to the speaker volume. While the
OSD is active, these buttons function as left
and right controls in the OSD menus.
INPUT (ENTER) – Repeated pressing of this
button steps through the input sources in the
following sequence: DTV/TV, AV(S-Video), Comp1,
Comp2, HDMI1, HDMI2, HDMI3, HDMI-Side, RGB, Photos and Music. Once
you have stepped through the entire sequence, you will return to the
beginning of the sequence.
Additionally, when the OSD is active, this button confirms the menu function
to be adjusted. When the OSD is not active, this button will show the current
input selections.