ZyAIR 200 Wireless LAN USB Adapter Quick Start Guide

3.3Windows XP

•Connect the ZyAIR 200 to an available USB port on your computer. Windows XP will auto-detect the ZyAIR 200 and display Found New Hardware Wizard window. Select Install from a list or specific (Advanced) and click Next.

•Insert the Support CD-ROM into the appropriate drive and specify the location where the driver. Click Next.

•If you encounter a warning window, click Continue Anyway to continue the installation process.

•Click Next and then Finish to complete the installation.

•Click Start, Control Panel, Performance and Maintenance (in category view) , System, Hardware, Device Manager. Click Network Adapters. Locate the ZyAIR 200 icon. If no error icon appears, your ZyAIR 200 is working.

4Utility Installation

•To install the ZyAIR 200 Utility, insert the Support CD-ROM and double click setup.exe.

•Follow the on-screen instructions to complete the utility installation.

•To run the utility for the first time, click Start, Programs and then ZyAIR 200 Utility. Then double click ZyAIR 200 Utility in the system tray and configure your ZyAIR 200 using this interface.

4.1Utility Information

Monitor and configure your ZyAIR 200 using the following utilities: Status, Counter, AP Browser, Configuration, Encryption and About.

4.1.1 Status

The Status tab displays the current status of the ZyAIR 200.

5