ZyAIR B-500 Wireless Access Point User’s Guide

The following table describes the fields in this menu.

Table 16-2 Menu 24.2.1 System Maintenance : Information

FIELD

DESCRIPTION

 

 

Name

Displays the system name of your ZyAIR. This information can be changed in

 

Menu 1 – General Setup.

Routing

Refers to the routing protocol used.

 

 

ZyNOS F/W

Refers to the ZyNOS (ZyXEL Network Operating System) system firmware version.

Version

ZyNOS is a registered trademark of ZyXEL Communications Corporation.

 

 

Country Code

Refers to the country code of the firmware.

 

 

LAN

 

 

 

Ethernet Address

Refers to the Ethernet MAC (Media Access Control) of your ZyAIR.

 

 

IP Address

This is the IP address of the ZyAIR in dotted decimal notation.

 

 

IP Mask

This shows the subnet mask of the ZyAIR.

 

 

DHCP

This field shows the DHCP setting of the ZyAIR.

 

 

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.

16.3.2 Console Port Speed

You can set up different port speeds for the console port through Menu 24.2.2 – System Maintenance – Console Port Speed. Your ZyAIR supports 9600 (default), 19200, 38400, 57600 and 115200 bps console port speeds. Press [SPACE BAR] and then [ENTER] to select the desired speed in menu 24.2.2, as shown in the following figure.

Menu 24.2.2 – System Maintenance – Change Console Port Speed

Console Port Speed: 9600

Press ENTER to Confirm or ESC to Cancel:

Figure 16-5 Menu 24.2.2 System Maintenance : Change Console Port Speed

After you changed the console port speed on your ZyAIR, you must also make the same change to the console port speed parameter of your communication software.

16-4

System Information and Diagnosis