ZyXEL Communications ZyXEL AG-120 5.4 The Advanced Screen, Save, 802.11b, Advanced, 802.11b+g

ZyXEL AG-120 User’s Guide

Table 17	Access Point Mode: Configuration (continued)
LABEL		DESCRIPTION
Key x (where x is a		Select this option if you want to manually enter the WEP keys.
number between 1		Enter the WEP key in the field provided.
and 4)		If you select 64 Bits in the WEP field.
		Enter either 10 hexadecimal digits in the range of “A-F”, “a-f” and “0-9” (for
		example, 11AA22BB33) for HEX key type
		or
		Enter 5 ASCII characters (case sensitive) ranging from “a-z”, “A-Z” and “0-9”
		(for example, MyKey) for ASCII key type.
		If you select 128 Bits in the WEP field,
		Enter either 26 hexadecimal digits in the range of “A-F”, “a-f” and “0-9” (for
		example, 00112233445566778899AABBCC) for HEX key type
		or
		Enter 13 ASCII characters (case sensitive) ranging from “a-z”, “A-Z” and “0-9”
		(for example, MyKey12345678) for ASCII key type.
		If you select 256 Bits in the WEP field,
		Enter either 58 hexadecimal digits in the range of "A-F", "a-f" and "0-9" (for
		example,
		0000111122223333444455556666777788889999AAAABBBBCCCC000011)
		for HEX key type
		or
		Enter 29 ASCII characters (case sensitive) ranging from "a-z", "A-Z" and "0-9"
		(for example, MyKey111122223333444455556678) for ASCII key type.
		Note: The values for the WEP keys must be set up exactly the
		same on all wireless devices in the same wireless LAN.
		ASCII WEP keys are case sensitive.
Save		Click Save to save the changes.
Cancel		Click Cancel to discard the changes.

5.4 The Advanced Screen

To set the wireless LAN mode of the AG-120, click the Advanced tab.

Select 802.11b to allow only IEEE 802.11a compliant WLAN devices to associate with the AG-120.

Select 802.11b+g to allow either IEEE802.11b or IEEE802.11g compliant WLAN devices to associate with the AG-120. The transmission rate of your AG-120 might be reduced.

Click Save to save the changes back to the AG-120.

Chapter 5 Access Point Mode Configuration 69