Chapter 1 General Troubleshooting

Identify Points of Failure on a DS-N Circuit Path

c.Proceed to the “Perform a Cross-Connect Loopback on the Source OC-N Port” procedure on page 1-23.

Step 4 If the test set indicates a faulty circuit, the problem might be a faulty card.

Step 5 Proceed to the “Test the XTC Card” procedure on page 1-7.

Procedure: Test the XTC Card

Step 1 Replace the suspect card with a card known to be good.

Step 2 Resend test traffic on the loopback circuit with a good card installed.

Step 3 If the test set indicates a good circuit, the problem is probably a defective card:

a.Return the defective card to Cisco through the returned materials authorization (RMA) process. Call the Cisco TAC.

b.Replace the faulty card.

c.Clear the loopback:

Click the Maintenance > Loopback tabs.

Choose None from the Loopback Type column for the port being tested.

Choose the appropriate state (IS, OOS, or OOS_AINS) from the State column for the port being tested.

Click the Apply button.

Click the Yes button in the Confirmation Dialog box.

d.Proceed to the “Perform a Hairpin on a Source Node XTC Port” procedure on page 1-8.

Step 4 If the test set indicates a fault circuit, the problem might be faulty cabling from the MIC card to the XTC card or a faulty MIC card.

Step 5 Proceed to the “Test the MIC Cabling” procedure on page 1-7.

Procedure: Test the MIC Cabling

Step 1 Replace the suspect cabling (the cables from the test set to the MIC or from the MIC to the XTC) with a cable that is known to be good.

If a good cable is not available, test the suspect cable with a test set. Remove the suspect cable and connect the cable to the Tx and Rx terminals of the test set. Run traffic to determine whether the cable is good or defective.

Step 2 Resend test traffic on the loopback circuit with a cable that is known to be good installed.

Step 3 If the test set indicates a good circuit, the problem is probably the defective cable:

a.Replace the defective cable.

Cisco ONS 15327 Troubleshooting Guide, R3.4

 

April 2003

1-7

 

 

 

Page 33
Image 33
Cisco Systems ONS 15327 manual Procedure Test the XTC Card, Procedure Test the MIC Cabling

ONS 15327 specifications

Cisco Systems ONS 15327 is a high-performance optical networking solution tailored for service providers and enterprises looking to enhance their optical communication infrastructure. This versatile platform is recognized for its robust performance, scalability, and flexibility, making it suitable for a wide array of applications ranging from broadband access to metropolitan area networking.

One of the standout features of the ONS 15327 is its ability to handle multiple data types over a single platform. It supports a rich array of protocols, including Ethernet and SONET/SDH, allowing service providers to deliver a diverse portfolio of services to their customers. This multiservice capability simplifies the network architecture, reducing operational complexity and costs.

The ONS 15327 is designed with a modular architecture, which enables operators to customize and scale their network as demand grows. It supports a variety of card options for different media types, wavelengths, and capacity requirements. This modularity not only facilitates straightforward upgrades but also allows for efficient network management.

In terms of technology, the ONS 15327 leverages dense wavelength division multiplexing (DWDM) capabilities to maximize the utilization of available fiber bandwidth. This allows for an impressive increase in transmission capacity without the need for additional fiber installations, making it a cost-effective solution for expanding networks.

Another significant characteristic of the Cisco ONS 15327 is its advanced performance monitoring and management features. Built-in diagnostic tools provide real-time visibility into network performance, enabling prompt identification and troubleshooting of potential issues. This proactive approach to network management enhances service reliability and customer satisfaction.

Security is also paramount in the ONS 15327. The platform integrates various security features and protocols to protect the data traversing the network, ensuring compliance with industry standards and safeguarding sensitive information.

Furthermore, the equipment is designed for easy integration into existing infrastructures. Its compatibility with Cisco’s broader networking solutions allows for seamless interconnection with routers, switches, and other devices, facilitating comprehensive network solutions.

In conclusion, Cisco Systems ONS 15327 stands out as a powerful optical networking platform that combines versatility, scalability, and advanced management features. Its ability to support various protocols and harness optical technologies makes it an essential tool for organizations aiming to optimize their telecommunications infrastructure while minimizing costs and complexity.