Cisco Systems SN 5428 manual Connecting to the 10/100 Ethernet Management and HA Ports

Chapter 2 Installing the SN 5428 Storage Router

Connecting to the 10/100 Ethernet Management and HA Ports

Connecting to the 10/100 Ethernet Management and HA Ports

To connect to the 10/100 management and HA ports, follow these steps:

Step 1 Use modular, RJ-45, straight-through UTP cables to connect the 10/100 management and HA ports to end systems. Use modular, RJ-45 cross-connect cables to connect to external switches and routers.

Step 2 Connect the appropriate modular cables to the 10/100 management and HA ports. (See Figure 2-17.)

Figure 2-17 Connecting to the 10/100 Management and HA Ports

Cable
To management	To HA network
network equipment	equipment

73999

Step 3 Connect the other end of the cable to the external end system, switch, or router.

	Cisco SN 5428 Storage Router Hardware Installation Guide
OL-4796-01		2-23