Cisco Systems SN 5428 manual Verify That Network Connections Are Operational

Chapter 2 Installing the SN 5428 Storage Router

Verifying Installation

Verify That Network Connections Are Operational

Verifying the network connections consists of making sure that the following ports are operational: Gigabit Ethernet, 10/100 Ethernet management, and 10/100 HA.

To verify that the network connections are operational, perform the following steps:

Step 1 Verify the Gigabit Ethernet port connections by checking the port link status LED. See Table 1-1 on page 1-6for LED indication descriptions.

Step 2 Verify the 10/100 Ethernet management port connection by checking the port link status LED. See Table 1-1 on page 1-6for LED indication descriptions.

Step 3 Verify the 10/100 HA port connection by checking the port link status LED. See Table 1-1 on page 1-6for LED indication descriptions.

Step 4 If any of these conditions are not met, reference Chapter 3, “Troubleshooting,” to isolate and, if possible, resolve the problem.

Verify That Fibre Channel Connections Are Operational

To verify that the connections are operational, perform the following steps:

Step 1 Verify Fibre Channel port connections by checking Fibre Channel LOG LEDs. See Table 1-1 on page 1-6for LED indication descriptions.

Step 2 If the LOG LEDs for connected ports are flashing, reference Chapter 3, “Troubleshooting,” to isolate and, if possible, resolve the problem.

	Cisco SN 5428 Storage Router Hardware Installation Guide
2-28	OL-4796-01