Fusionbrands MS-IP700i To enable or disable the AM of VHF tuner sources, Set Aux name, About

To enable or disable the AM of VHF tuner sources:

1.Press the Menu key.

2.Turn and then press the Encoder to select the Settings > Sources.

3.If required, press the Encoder to enable the AM source ( ) or disable

the AM source ( ).

4.If required, turn the Encoder to select VHF then, press the Encoder to

enable the VHF source ( ) or disable the VHF source ( ).

5.Press any key to exit.

Set Aux name

Select `Set Aux name’ to give the AUX input a name that is more representative of the device connected to the AUX input. Select a name from the available list. The name is displayed on the AUX Source screen along with a matching graphic.

Accessory (Shared BT-200 Bluetooth & SiriusXM Source)

If you have installed the MS-BT200 Bluetooth module or SiriusXM Tuner (USA Only) you will need to enable the source. This operation will be determined by the Tuner region you have selected.

Tuner Region - USA

When USA Tuner region is selected, press the menu button and select Settings>Sources>Accessory then select the source to enable SiriusXM or Bluetooth.

Tuner Region - Australasia-Europe-Japan

In these Tuner regions once the MS-BT200 is installed and connected the source will be available.

Set device name

Select `Set Device Name’ to give the Stereo a network name of your choice. The name is visible to other devices (Marine Wired Remotes MS-NRX200i) connected to the same FUSION network. Rotate the rotary encoder to change the character. Press the rotary encoder to select. Press the `Previous’ button to delete characters. · To save changes press the `Play’ key. · To exit without saving any changes: press the Menu key.

About

This option displays the Stereo software version, remote control version and FUSION-Link software versions.

53