APPENDICES

TROUBLESHOOTING

Problem

Solution

 

 

General

 

The unit does not respond to key presses.

Reset the unit by pressing the Reset button inside the control panel door.

What is the best way to prevent corrosion on my 700 Series chrome finish?

As with all products exposed to the harsh marine environment, a little care will help to preserve the finish. FUSION recommends that you clean any salt water and/or salt residue from the front panel with a damp cloth soaked in fresh water.

Problem

Solution

 

 

SiriusXM

 

 

 

When I press

Ensure you have the MS700i Tuner region set to ‘USA’. Press Menu >

the tuner source

Settings > Tuner region > and select ‘USA’.

button the

Ensure the source is enabled. Select; Settings>Sources>Accessory then

SiriusXM screen is

select the source to enable SiriusXM.

not displayed.

• Ensure the SiriusXM module is plugged into the MS700i.

 

• Unplug the SiriusXM module and check the pins in the SiriusXM

 

plug are not damaged.

 

 

SiriusXM message:

• Ensure the SiriusXM module is plugged into the MS700i.

‘Check Tuner’

• Ensure the SiriusXM cable has not been damaged.

 

 

SiriusXM message:

• Ensure the antenna is plugged into the SiriusXM Tuner module.

‘Check Antenna’

• Ensure the antenna is not damaged.

 

• Ensure the antenna cable has not been damaged

 

 

SiriusXM message:

• Ensure the antenna is not damaged.

‘No Signal’.

• Ensure the antenna has a clear view of the sky and is not obscured.

 

• Ensure the antenna cable has not been damaged

 

 

SiriusXM message:

A SiriusXM message informing you that the current channel is unavailable.

‘Channel xx Not

Possible causes are SiriusXM has removed the channel or your SiriusXM

Available’

subscription has changed.

 

• Contact SiriusXM to update your subscription.

 

• Online: Go to www.siriusxm.com/subscriptions

 

• Phone: Call 1-866-635-2349

 

 

55

Page 56
Image 56
Fusionbrands MS-IP700i, MS-AV700i manual Appendices, Problem Solution General, Problem Solution SiriusXM