Storage
Insert the drip tray (3) in the front of the appliance, under the grill plate (2).
Insert the protective cover (1) at the back of the appliance, as shown in the drawing opposite.
Close the protective cover (1) to protect the grill plate (2).
The protective cover (1) will not close correctly while the control unit (4) is inserted in the appliance.
Do not insert the control unit (4) in the appliance.
Place the appliance on its support legs.
Unlock the wire support struts (9) by sliding the tabs (13).
Fold down the trays (10) by removing support wires (9) inserted under the trays (10).
The service tray (15) may be placed on the support legs storage rack (8).
Place the service tray (15) on the support legs instead of the barbecue to make a temporary table.
The support legs must be used for the Largo barbecue only, or for ingredients and utensils reserved for barbecue use.
Store the appliance and control unit (4) in a dry place.
Never store the appliance in direct sunlight or leave it outside during winter.
