the Information Center under Systems Management -> Backup, recovery, and availability -> Manuals and Redbooks.

vThe Backup, recovery, and availability topic under Systems Management in the Information Center:

http://www.ibm.com/eserver/iseries/infocenter

To find the procedure for saving the entire system (using option 21) in the Information Center, do the following:

a.Click Systems Management

b.Click Backup, recovery, and availability

c.Click Backing up your server

d.Click Saving your server with the GO SAVE command

e.Click Saving your whole server with GO SAVE: Option 21

__ 11. Resume normal system operations and processing.

__ 12. To verify that all your applications are running properly, use the system with the new software release until you feel comfortable with the new production environment. For example, many customers use the system for 2 weeks or longer.

Preparing for System Assurance prior to hardware upgrade

Before the hardware upgrade is to take place, the customer should do the following:

__ 1. Ensure that the currently installed machine and LPAR partitions are documented.

No LPAR or LPAR Primary Partition

Secondary LPAR Partitions

 

 

Before proceeding with the MES Installation,

Use the same procedure as described for the

where possible, use (A) or (B) to document

primary partition for each secondary

the installed iSeries server. Use an

partition that is configured.

appropriate method:

 

(A) - If your country supports the

 

WRKORDINF command and if the installed

 

iSeries server is capable of using Electronic

 

Customer Support (ECS), use this method:

 

On the command line, type WRKORDINF,

 

then press Enter.

 

On the next screen, enter Option 1 in the

 

Option field next to QMAnnnnn

 

Note: nnnnn is the serial number of the

 

machine, press enter. Write ECSon the top

 

of the RMER form.

 

(B) - Use this method if the installed iSeries

 

server is not ECS capable, or you cannot use

 

’A’ for another reason: On the command line

 

type DSPSFWRSC *PRINT, press enter.

 

Retrieve hard copy listing from the system

 

printer. Attach the listing to the RMER. If no

 

RMER form is present, then ignore this step.

 

 

 

20iSeries 940x RISC-to-RISC Road Map V5R1

Page 32
Image 32
IBM SA41-5155-05 manual Preparing for System Assurance prior to hardware upgrade