4Click Ok to accept the destination settings. The destination properties are now locked.
Note: This option is only available if you are logged on as a Key operator (see ‘User modes’ on page 163).
▼Unlock a destination
1 Select a destination.
2 Open the ‘File’ menu and select ‘Properties’.
3 Uncheck the ‘Locked’ check box.
4 Click OK to accept the destination settings.
The destination properties are now unlocked.
Note: This option is only available if you are logged on as a Key operator (see ‘User modes’ on page 163).
▼Delete a destination
1 Select a destination.
2Open the ‘File’ menu and select ‘Delete’ or click the ‘Delete’ button on the toolbar (see Figure 33).
[33] ‘Delete’ button on the toolbar
The selected destination is deleted.
Note: This option is only available if you are logged on as a Key operator or as a Repro operator.
Note: You are not able to delete the last destination.
▼Set / Change destination properties
1Select a destination.
2Open the ‘File’ menu and select ‘Properties’ or click the ‘Properties’ button on the toolbar (see Figure 34).
[34] ‘Properties’ button on the toolbar
The ‘Destination properties’ screen appears as in figure 32 on page 83.
3Change the destination properties as described in ‘Create a local destination’ on page 82.
Using the Océ TDS800 to | 85 |
