LightSPEED
Controls and Functions
Wireless Transmitter
Belt-pack
| Red LED 3 |
|
| SwitchMute 4 |
|
1 | JackMic 5 | 6 |
On/Off |
| Battery |
Switch |
| Charge |
|
| Jack |
2 |
| 7 |
| Belt | |
LCD |
| |
| Clip | |
Display |
| |
|
| |
CH: 001 |
|
|
| LightSPEED |
|
8
Gain 9
Adjust UP
10
GT | Set |
| MT |
DoorLatch 11
DOWN 9
12BatteryCompartment
BP-900 BELT-PACK TRANSMITTER CONTROLS and FUNCTIONS
1.Power Button: Turns the transmitter ON. (Hold for two seconds.)
2.LCD Display: Information screen appears when the power is switched on.
3.Red LED: Lights up briefly when power is switched on, flashes continuously when audio signal is muted.
4.Mute Switch: Turns the audio signal on or off. The red LED will flash when MUTE is engaged.
5.Microphone Jack: Microphone connects to transmitter here.
6.Battery Charge Jack: Optional battery charger plugs in here (for NiMH batteries only).
7.Belt Clip
8.Gain: Provides adjustment for differing voice levels and microphone sensitivities.
9.UP and Down Buttons: These buttons scroll up and down between setup screens on the LCD display. They are also used to enter changes in each setup screen.
10.Set Button: This button is used to enter and save changes to the transmitter settings.
11.Door Latch: A door latch button is located on each side. Press both to open the battery compartment door.
12.Battery Compartment
LightSPEED Technologies • Wireless Sound Solutions • Toll Free: | 6 |
