Multiquip manual AR13D RIDE-ON Roller Inspection, Fuel Check, Hydraulic Oil Check

AR13D RIDE-ON ROLLER — INSPECTION

Fuel Check

DANGER - EXPLOSIVE FUEL

NEVER fill the fuel tank while the engine is running or in the dark. Fuel spillage on a hot engine can cause a fire or explosion. If fuel spillage occurs, wipe up the spilled fuel completely to prevent fire hazards.

DO NOT smoke while refueling, motor fuels are highly flammable and can be dangerous if mishandled.

1.Tochecktheenginefuellevel,placethe rolleronsecurelevel ground with the engine stopped.

2.Tilt the operator's seat (Figure 10) forward to gain access to the fuel tank.

4.If the fuel level is low, remove the fuel fillercap/guage and fill with #2 diesel fuel. Wipe up any spilled fuel immedi- ately.

5.Pay attention to the fuel tank capacity when replenishing fuel (Figure 12). Refer to the fuel tank capacity listed on page 13, AR13D Roller Specification Table 1.

Figure 12. Adding Fuel

6.Afterreplenishingfuel,makesurefuelcapissecurelytighten to fuel tank. Return operator's seat to normal operating position.

Hydraulic Oil Check

1.To check the hydraulic oil level, place the roller on secure level ground with the engine stopped.

2.Visually inspect the hydraulic oil sight glass (Figure 13) located on the right rear of the front drum. For normal operation the hydraulic oil level must be below the top and above the bottom of the sight glass. DO NOT OVERFILL!

Figure 10. Fuel Tank Access

3.Readthefuelgauge(Figure11)locatedontopofthefueltank to determine if fuel level is low.

Figure 13. Hydraulic Oil Sightglass

4. If the hydraulic oil level is low, remove the hydraulic oil cap (Figure 14) and fill with type ISO46anti-weartypehydrau-

Figure 11. Fuel Guage

lic oil to the recommended operating level.

AR13D RIDE-ON TANDEM DRUM ROLLER — OPERATION & PARTS MANUAL — REV. #2 (09/15/11) — PAGE 23