Conformity,Environment and Safety

Safety information

This equipment is not designed to make emergency calls when the power fails. An alternative has to be made available to allow emergency calls.

Conformity

Hereby, Philips declares that the DECT 511xx and DECT 515xx are in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.This product can only be connected to the analogue telephone network of the UK and Ireland.

Power requirements

This product requires an electrical supply of 220-240 volts, alternating monophased power, excluding IT installations defined in standard EN 60-950. In case of power failure, the communication can be lost.

Warning !

The electrical network is classified as hazardous according to criteria in the standard EN 60-

950.The only way to power down this product is to unplug the power supply from the electrical outlet. Ensure the electrical outlet is located close to the apparatus and is always easily accessible.

Telephone connection

The voltage on the network is classified as TNV-3 (Telecommunication Network Voltages), as defined in the standard EN 60-950.

Safety precautions

Do not allow the handset to come into contact with water. Do not open the handset or the base station.You could be exposed to high voltages. Do not allow the charging contacts or the battery to come into contact with conductive materials.

Environmental care

Please remember to observe the local regulations regarding the disposal of your packaging materials, exhausted batteries and old phone and where possible promote their recycling.

12

Conformity, Environment and Safety

http://www.philips.com/faqs/dect

Page 13
Image 13
Philips DECT511, DECT515 user manual Conformity,Environment and Safety