Printronix PSA3, P7000 H-Series manual Select Bold Font, Cancel Bold Font, Select Character Style

Chapter 3 Configuring The KSSM Emulation With Control Codes

Select Bold Font

ASCII Code	ESC E
Hex Code	1B 45
Dec Code	27 69
Purpose	Sets the weight attribute of the font to Bold.
Comment	This command increases the weight of printed lines and
	characters, resulting in bolder printing.
	This command affects “Bold Print” on the front panel.
	The default is Normal (non-bold) print.

Cancel Bold Font

ASCII Code	ESC F
Hex Code	1B 46
Dec Code	27 70
Purpose	Sets the font to Normal (cancels the bold print previously set
	with the ESC E command).
Comment	This command affects “Bold Print” on the front panel.
	The default is Normal (non-bold) print.

Select Character Style

ASCII Code	ESC q n
Hex Code	1B 71 n
Dec Code	27 113 n
Purpose	Turns on/off outline and shadow printing, according to the
	parameters below:
	n = 0 Turns off outline/shadow printing
	n = 1Turns on outline printing
	n = 2Turns on shadow printing
	n = 3Turns on outline and shadow printing
	Where:
	0 <= n <= 3
Comment	This command does not affect graphics characters.

56