Sharp UP-X300 Receipt printing on a remote printer, Sort shift function, Hold and go function

Receipt printing on a remote printer

■Sort shift function

Registered items are printed on remote printers according to their sort groups.

You can temporarily change the group number of an item to be registered by using the [S.SFT] key. If the [S.SFT] key is used for a link, combo, or condiment PLU, the sort group numbers of all items are changed.

1.

2.

Enter a new sort group number (01-99), and touch the [S.SFT] key.

Make an item entry.

NOTE

When “00” is entered as a sort group number, the item is printed immediately at registration.

■Hold and go function

This function allows you to hold an order or an item of an order until the guest is ready to receive order. For example, you may use this function to hold a dessert so that it is not served until a main dish has completed.

Items which is under the holding status are indicated by the symbol “P” on the receipt window.

Hold and go for all items in a transaction (the whole order):

To hold, touch the [KP HOLD] key.

To release the holding status, touch the [KP GO] key.

Hold and go for an item in a transaction:

To hold, touch an item to be held, and touch the [KP HOLD] key.

To release the holding status, touch the item, and touch the [KP GO] key.

AUTO delay

If a delay time is programmed, the held item(s) will be printed automatically when the time has elapsed after a clerk exits the table subjected to the order.

141