Instructions for the installer | Smeg PGF95F-1, PGF95-1, PGF95BE-1

Instructions for the installer

Overall dimensions: location of gas and electrical connection points (all measures in mm).

Caution: surface temperature underneath may exceed 125 degrees C. To avoid a hazard, under-bench access must be restricted.

Refer to installation instruction

IMPORTANT: when installing the appliance above a cupboard, a dividing shelf, as shown above, must be installed.

If installed above an under-bench oven, this is not required.

Installation of an oven without cooking fan underneath the hob is forbidden.

25

Image 7

Smeg PGF95F-1, PGF95-1, PGF95BE-1 manual Instructions for the installer

Contents

Summary Adjustment to Different Types of GAS Instructions for Safe and Proper USE Introduction Data Plate on the Protective Cover Must Never be Removed Positioning of the HOB Instructions for the installer Instructions for the installer Attachment to support structure, flush-mounting model Instructions for the installer Electrical connection Discharge of combustion products Ventilation requirements Connection to LPG Gas connection Replacement of nozzles on the hob Adjustment to Different Types of GAS Arrangement of burners on cooking hob Burner and nozzle characteristics table Lubrication of gas taps Final OperationsRegulation of minimum for town gas and natural gas Regulation of minimum for LPG Instructions for the user Using the HOBIgnition of the burners Diameter of receptacles Practical advice for using the burners Cleaning the stainless steel Cleaning and MaintenanceCleaning of cooking hob components