Star Micronics LC24-20 Execute &SC a, Line feed, Reverse linefeed, Select forward feed mode

Execute &SC> “A”

Mode	ASCII	Decimal	Hexadecimal
IBM	<ESC> “2”	27 50	IB 32

Sets the line spacing to the value defined by the last preceding <ESC> “A” command. Sets the line spacing to 1/6inch if there is no preceding <ESC> “A” command.

Line feed

Mode	ASCII	Decimal	Hexadecimal
Both	<LF>	10	OA

Prints the current line and feeds the paper to the next line. See the preceding commands for the line spacing.

Reverse linefeed

Mode	ASCII	Decimal		Hexadecimal
Std.	<ESC> <LF>	27	10	IB	OA
IBM	<ESC> “1“	27	93	IB	5D

Prints the current line and feeds the paper in the reverse direction to the preceding line. See the preceding commands for the line spacing.

Select forward feed mode

Mode	Ascll	Decimal	Hexadecimal
Std.	<FS> “F”	28 70	IC 46

Cancels the reverse feed mode and selects forward feed mode. This is the default setting at power-on.

Select reverse feed mode

Mode I	ASCII	\ Decimal	I Hexadecimal I
Std.	<FS> “R”	28 82	] IC 52

Selects reverse feed mode. Reverses the direction of all vertical movements. Ignored when friction feed or bottom feed is used.

98