Toshiba e-STUDIO500P manual Exiting Diagnostics mode

Diagnostics mode tests (continued)

EP SETUP

EP Defaults	See “EP Defaults” on page 3-22
Fuser Temp	See “Fuser Temperature (Fuser Temp)” on page 3-22
Fuser Page Count	See “Fuser Page Count” on page 3-22
Warm Up Time	See “Warm Up Time” on page 3-22
Transfer	See “Transfer” on page 3-22
Print Contrast	See “Print Contrast” on page 3-22
Charge Roll	See “Charge Roll” on page 3-22
Gap Adjust	See “Gap Adjust” on page 3-22
EVENT LOG
Display Log	See “Display Log” on page 3-23
Print Log	See “Print Log” on page 3-23
Clear Log	See “Clear Log” on page 3-24
EXIT DIAGNOSTICS

Exiting Diagnostics mode

Select Exit Diagnostics to exit the Diagnostics mode. Resetting the Printer displays, the printer performs a POR, and returns to normal mode.

REGISTRATION

Print registration makes sure the printing is printed properly aligned on the page.

The settings available are:

Bottom Margin

Top Margin

Left Margin

Right Margin

Quick Test

To set print registration:

1.Select REGISTRATION from the DIAGNOSTICS menu.

2.Select Quick Test, and press . To print the Quick Test page:

a.Press until the appears next to Quick Test.

b.Press .

The message Quick Test Printing… appears on the display.

Retain this page to determine the changes you need to make to the margins settings.

3-4Service Manual