S0~m-1mjpegpriorit Framerate Policy to apply when | Vivotek VS8100

VIVOTEK


	s<0~(m-1)>_h264_quant	1~5,99,100	3	4/4	Quality of video when
					choosing vbr in
					“ratecontrolmode”.
					Set the pre-defined quality
					level:
					1: Median
					2: Standard
					3: Good
					4: Detailed
					5: Excellent
					100: Use the quality level in
					"qpercent"
					99: Use the quality level in
					"qvalue"

	s<0~(m-1)>_h264_qpercent	1~100	50	4/4	Set quality by percentage.
					1: Worst quality
					100: Best quality
					(s<0~(m-1)>_h264_quant =
					100)

	s<0~(m-1)>_h264_qvalue	0~51	29	4/4	Manual video quality level
					input.
					(s<0~(m-1)>_h264_quant =
					99)

	s<0~(m-1)>_h264_bitrate	1000~4000000	3000000	4/4	Set bit rate in bps when
		0			choosing cbr in
					“ratecontrolmode”.

	s<0~(m-1)>_h264_maxframe	1~25,	25 => PAL	1/4	Set maximum frame rate in
		26~30 (only for	CCD or		fps (for h264).
		NTSC or 60Hz	50Hz
		CMOS)	CMOS
			30 =>
			NTSC
			CCD or
			60Hz
			CMOS

	s<0~(m-1)>_h264_profile	0~2	1	1/4	Indicate H264 profiles
					0: baseline
					1: main profile
					2: high profile

	s<0~(m-1)>_mjpeg_priorit	framerate,	framerate	4/4	The policy to apply when

126 - User's Manual

Image 126

Vivotek VS8100 user manual S0~m-1mjpegpriorit Framerate Policy to apply when

Contents

Rev Table of Contents Package Contents Revision History Overview Read Before Use Physical Description Installation Status LED Hardware Reset Setting up the Video Server over the Internet Network Deployment Vivotek Internet connection with static IP Software Installation Video Server Ready to Use Accessing the Video Server Using Web Browsers Vivotek Using Rtsp Players Using 3GPP-compatible Mobile Devices Qcif Using Vivotek Recording Software Main Manual Trigger Area Vivotek Client settings MP4 saving options Joystick settings Configuration System SystemSystem time General settings System Homepage layout Theme Options Vivotek Log server settings System LogsSystem log Internet Access log System Parameters System Maintenance General settings Upgrade firmwareGeneral settings Reboot General settings Restore Import/Export files Vivotek Tips Media Image Image settings Privacy mask Stream settings Media Video Vivotek Vivotek Vivotek Audio Settings Media Audio Network General settings Network Type PPPoE Point-to-point over Ethernet Error Router does not support UPnP port forwarding Vivotek Enable IPv6 Http//20010c08250000020202d1fffe0465f4 Port Network Streaming protocols Http streaming Rtsp Streaming VLC Vivotek Network Ddns Express link Manual setup Ddns Dynamic domain name service CustomSafe100 Network QoS Quality of Service Requirements for QoS QoS/DSCP the DiffServ model Snmp Configuration Network Snmp Simple Network Management Protocol Privilege Management Root PasswordSecurity User accounts Account Management Create and Install Certificate Method Security Https Hypertext Transfer Protocol over SSL Https Create certificate request and install Vivotek Vivotek Vivotek Vivotek Security Access List Filter Administrator IP address IP address range 192.168.2.x will be bolcked Maximum length of password is 200 symbols Security Ieee Vivotek PTZ PTZ settings RS485 settings Preset positions Position is set as the center position Camera ID settings Patrol settings Custom Command Command buttons will be displayed on the main Event Event settings Event Trigger Action Add server Vivotek Vivotek Format is Yyyymmdd Click to open the directory Format is HH 24r Add media Trigger Activation Video20101213100341 Vivotek Customized Script Follow the steps below to enable motion detection Applications Motion detection Check Enable this profile Vivotek Check Enable camera tampering detection Applications Tampering detection Recording Recording settings Recording Settings Continuous recording NAS server Vivotek 20130210 20130211 20130212 URL Commands for the Network Camera/Video Server Appendix General CGI URL Syntax and Parameters Security Level Get Server Parameter Values Vivotek Set Server Parameter Values Value to assigned Assign value to the parameter groupname Vivotek Available parameters on the server System Group system Vivotek None Vivotek System.info Status SecurityGroup status Network Group network Subgroup of network ieee8021x capability.protocol.ieee8021x TLS Subgroup of network qoscos capability.protocol.qos.cos Subgroup of network qosdscp capability.protocol.qos.dscp Subgroup of network http Subgroup of network ipv6 capability.protocol.ipv6Subgroup of network ftp Port Https port Subgroup of network rtsp capability.protocol.rtsp Subgroup of network rtp Subgroup of network pppoe capability.protocol.pppoe IPv6 address list IP FilterVideo input Group videoin Video input setting per channel Svc is only supported with Stream CIF 4CIF S0~m-1mjpegpriorit Framerate Policy to apply when Cmos Image setting per channel Group imagec0~n-1for n channel products Audio input per channel Time Shift settings Motion detection settingsGroup motionc0~n-1for n channel product Tampering detection settings Ddns Express link System log UPnP presentationUPnP port forwarding Group syslog Preseti0~npreset-1 Dwelling time of each Preset location Camera PTZ control Uart control Group uart capability.nuartGroup uarti0~n-1n is uart port count capability.nuart Snmp Group snmp capability.snmp Layout configuration Group layout New version Privacy mask CapabilityGroup privacymaskc0~n-1for n channel product Vivotek Rtsp Videoinnresolution Only for 5M series Mjpeg, Bit 2 h264, Bit VideoinstreamcodecBit 0 mpeg4, Bit Svc Transmissionmode Product can be upgraded to Event setting Customized event scriptGroup eventi0~2 Indicate the source id of vi trigger Null Server setting for event action Group serveri0~4 Media setting for event action Group mediai0~4 mediafreespace is used internally Recording Group recordingi0~1 Indicate the prefix of the filename Unit Mega bytes When this condition is reachedHttps Recording file is truncated Vivotek Where state can be 0 or Drive the Digital Output capability.ndoQuery Status of the Digital Input capability.ndi Query Status of the Digital Output capability.ndo Example Query the status of digital input Request Capture Single Snapshot \r\n Do1=1\r\n Account Management Upgrade Firmware System LogsMethod Post Syntax Camera Control capability.ptzenabled Return=return EPTZ Camera Control capability.eptz Parameter Value Description Recall capability.ptzenabled Preset Locations capability.ptzenabled EPTZ Recall capability.eptz EPTZ Preset Locations capability.eptz IP Filtering Uart Http Tunnel Channel capability.nuart Type Event/Control Http Tunnel Channel capability Channel ~ n-1 Channel number of Uart Get SDP of Streams Open the Network Stream Senddata capability.nuart Storage managements capability.storage.dbenabled Command search File is locked Indicate if the file is locked or notFile is not locked Locked file would not be removed from UI or cyclic Return Message Vivotek Command queryStatus Ex. Local storage status in XML formatEx. Local storage status in javascript format Http//servername/cgi-bin/admin/downloadMedias.cgi?FilePath FilePath is in queryststus return message Virtual input capability.nvi Timeshiftenable=1, timeshiftcnsmallow=1 Open Timeshift Stream capability.timeshift Export Files Currentlanguage ~20 Upload Files Method Post Stime Start time Etime Start wireless connection Site survey Remote Camera Control capability.remotecamctrl.master 0x000001F6 502 Function is Disabled 0x000000C8 200 Control auxiliary Camera Controller Upload map file capability.remotecamctrl.master Technical Specifications Technical Specifications Technology License Notice AMR-NB Standard Electromagnetic Compatibility EMC Liability