Vivotek VS8100 user manual Image settings

VIVOTEK

Image settings

On this page, you can tune the White balance and Image adjustment.

Image Adjustment

■Brightness: Adjust the image brightness level, which ranges from 0% to 100%.

■Contrast: Adjust the image contrast level, which ranges from 0% to 100%.

■Saturation: Adjust the image saturation level, which ranges from 0% to 100%.

■Sharpness: Adjust the image sharpness level, which ranges from 0% to 100%.

■X-offset: Adjust the image to the proper position horizontally.

■Enable deinterlace: Check to enable deinterlace, and choose Adaptive mode or Blend mode in the drop-down list. Adaptive mode provides the best image quality, while Blend mode provides better image quality (than not using the deinterlace function at all).

■Enable noise reduction: Check to enable noise reduction in order to reduce noises and flickers in image. This applies to the onboard 3D Noise Reduction feature. Use the pull-down menu to adjust the reduction strength. Note that applying this function to the video channel will consume system computing power.

3D Noise Reduction is mostly applied in low-light conditions. When enabled in a low-light condition with fast moving objects, trails of after-images may occur. You may then select a lower strength level or disable the function.

■Restore: Click to restore the default setting.

■Save: When finished with the setting, click Save to enable the settings.

38 - User's Manual