Installing the Printer Drivers

Windows 2000 or Later

To install the printer driver from the Software and Documentation CD-ROM:

1.Insert the CD-ROM into the computer’s CD-ROM drive. If the installer does not launch, do the following:

a.Click Start, and then click Run.

b.In the Run window, type: <CD drive>:\SETUP.EXE.

2.Click the Language button, select your language, and click OK.

3.Select Install Printer Driver.

4.Click I Agree to accept the license agreement, and show the Xerox Print Driver Installation window.

5.Select the Phaser 6280 driver and click Install to show the Installation Options window.

6.Select either PostScript and/or PCL 6 and click OK.

7.Click Install to start the installation.

8.When the installation is complete, select any of the following from the Installation Status window:

Set Printer As Default

Print A Test Page

Share Printer

9.Click Finish.

Note: PrintingScout is a separate option from the printer driver. To install PrintingScout, click Install PrintingScout in the Software and Documentation CD-ROM. Then follow the wizard to complete installation.

See also:

Online Support Assistant at www.xerox.com/office/6280support

Phaser® 6280 Printer

40

Page 40
Image 40
Xerox Phaser 6280 manual Windows 2000 or Later