Yamaha Yamaha Robot Controller CC-Link Unit, RCX Series owner manual Press the F Edit key

6.Parameter setting for CC-Link serial I/O board

4)Select the parameter with the cursor (↑/↓) keys.

Fig. 2-6-3

SYSTEM>PARAM>OP.BRD>SELECT V8.18

		1.board condition			VALID
		2.remote cmd / IO cmd(SI05)			VALID
		3.Output MSG to SOW(1)			INVALID
	EDIT			JUMP
5) Press the F 1			(EDIT) key.

Fig. 2-6-4

SYSTEM>PARAM>OP.BRD>SELECT V8.18

			1.board condition		VALID
			2.remote cmd / IO cmd(SI05)		VALID
			3.Output MSG to SOW(1)		INVALID
		INVALID		VALID
6)	Press the	F 1 (INVALID) or F 2 (VALID) key.
7)	Press the	ESC key to quit the edit mode. To continue setting another parameter,
	use the cursor (↑/↓) keys to select the parameter.

2

Connection

2-9