RCA WHP150 manual CHARGING THE BAnERIES

CHARGING THE BAnERIES

I

1)Switch the ON /OFF switch on the headphone receiver to OFF.

2)Plug the charge output plug, located on the back of the transmitter, into the charge input jack of the headphone receiver to charge the batteries.

3)The charging process starts automatically and the RED LED lights up indicating the unit is charging.

4)After the quick charge is completed, the quick charge indicator will be OFF; however, the trickle charge will continue.

Caution: Do not use other kinds of batteries to replace the Ni-Cd quick charge (AA) battery. When you are not using the head- phone, please switch it off as the batteries can be damaged.

HeadphoneBase

aRed LED

The Ni-Cd (nickel cadmium) batteries must be fully charged prior to operation. An initial charge of 24 hours is required to ensure the extended life of the Ni-Cd batteries. Be sure the headset is in the OFF position during charging status.

6